Lenovo3000 give me links for good offer of this reader and adapter TSOP48 , please.

@mari95
Reader = czytnik kart xD
adapter TSOP48 = adapter kupiony na ebay
płytka pod adapter = płytka z Gotronik.pl kupiona na allegro
Najgorzej wlutować w/w adapter w płytkę tak by nie doszło do zwarcia na istotnych pinach.
Nie ma linku do gotowego programatora. Jedynie do tego co Rosjanie proponują. Samemu musisz coś takiego złożyć. Jak to będzie działać zależy od dokładności składającego. Karty xD to nic innego jak nandflash tylko w innej obudowie jak TSOP48. Programu do edycji zawartości to poleciłbym DMDE.
Całkiem ciekawy pomysł to skrzyżowanie rozłożonej karty Mstick (tylko sam kontroler) ze złączem-szczęką umożliwiającą wsadzenie karty xD. Wtedy nie będzie potrzebne babrać się w NANDach bo wystarczy odpowiedni wsad Yoti-ego wsadzony na Xd i dalej jak w opisie. Wtedy nie będzie potrzeby kupować drogiego programatora. Tak czy inaczej samemu trzeba nad tym pomysleć.
Sam widzisz że linku żadnego nie podam. By znaleźć adapter wpiszesz "TSOP48" w ebay.com.au i ci wywali kilku sprzedawców . Są dwa czy trzy rodaje tych adapterów. Ja kupiłem najtańszy. Wydałem koło 49zł . Korzystaj że dolar tani. Może do 2.50zł za 1USD daleko ale urwać 1/3 można przy wahaniach. Powodzenia.

Lenovo3000 to widzę ,że jednak lipna sprawa z tym programowaniem. Nie takie łatwe jakby się wydawało. Czy ty umiesz zaprogramować i możesz zaprogramować taką kartę? Odkupiłbym od ciebie. Szkoda ,że nie ma chociaż jednej osoby ,która sprzedaje takie karty.

you can unlock my psp
PSP-3004 è il codice 8D ta-090
PSP-3004 è il codice 9D ta-090
PSP-3004 è il codice 9C ta-093

A big thanks from Portugal for the work and translation.

It's a shame that the reader is so expensive, I hoped some chinese fab already taken up the task to sell these online.

Thanks anyway!!! Great work

cw455, no, only ta-088v3(PSP-200*) supported

For all PSP-20xx

Frostegater, not work on TA-090v2?

mari95, yaaahr.. 090v2 its PSP-200x?!

TA-090 is in slim 2000. TA-090v2 - first motherboard in slim 3000.

mari95, TA-090v2 not supported, all psp 300* not supported

excuse me:scratch_one-s_head:, what is the main point of having TSOP Programmer? is it only to CHANGE the MS ID?

hello I would like to know if it was possible to modify the ms without resorting to the method of opening the ms, a software program in bulk?

tymagix, it is impossible
ikyak, I do not understand the question

Hi, sorry if these are stupid questions.

Is the information that you change in the nand of a memory stick protected by any copyright laws or any law? Why is it impossible to find this for sale anywhere?(lack of commercial interest? illegal to sell? am I looking in the wrong places :)?)

Thanks

lpinho, it is illegal, and that no one involved in

agreed thank you for your reply I have only bought me a nand programmer TSOP48

tymagix добавил 01.03.2012 в 14:58
for the programmer need a TSOP48 8 bit or 16 bit?

tymagix, 16 bit

i mean, is the reason of having that tool(TSOP, only to change msid? if so, then why don't we just change it via some softwares which already have the feature, such as MiniTool Partision Wizard. CMIIW :scratch_one-s_head:

ikyak, it is impossible to have all tried

is it possible to program a micro sd card with a program to change the msid and then put in an adapter msproduo getting started the psp?

To do this we need to know, how this adapter works(I haven`t found information about it). First question is where is located msid area - in adapter or in service area of microsd? All dumps, I succseeded to save, begins from following(I used 256mb microsd so don't be surprised about FAT16):
[img]http://img404.**************/img404/8980/screenmhp.jpg[/img]

And look here(File system part):
https://www.pspx.ru/forum/attachment....4&d=1322490201

I have no idea how to access area before this in microsd

DOes it work? Have u tested it?
Have I to unsold my ms for "fit" it in this reader? or is it just a plug and play?

thanks :)

msid the area is in the service area of the microsd I think because the adapter does not have a nand

Adapter has build-in eeprom or, in old ones - separated 8-pin eeprom chip. It would be interesting to dump such chip, but I saw such adapter only on photo

Pleeeease! Help me unbrick my psp 2006 ta-088v3 i'm new to this programming thing but i promise i'll do my very best to make my psp alive, pleeeease! :(

What help do you want? do not you understand that? it all there's the de******ion on how to unbrick your psp on the forum

first, there is no available link for the MSID dumper and SRC, then where to buy cheap NAND tsop 43 programmer? sorry for not understanding because im new to such things and i envy them, they've already fixed their psp 200x with the specific mobo. :(

http://cgi.ebay.fr/Willem-5-0-Progra...item2eb3f4fe2a

tymagix добавил 03.04.2012 в 21:23
http://www.flash-extractor.com/shop/

tymagix добавил 03.04.2012 в 21:26
https://www.pspx.ru/forum/showthread.php?t=92433

tymagix добавил 03.04.2012 в 21:31
Here you have the links you need for the programmer you have to check that your nand is supported

is there any video or tutorial on how to make that service mem stick? :(

or is there a more simple way? i mean without buying such things? :( *sigh*

is this impossible for me :(

I'm sorry there is no video on how to make the card and unfortunately there is not no other way for now, we should ask if he has yoti can make a full video of the desoldering nand, its programming and its reintegration into the PSP.

No. We can't make a video of the desoldering nand, its programming and its reintegration into the PSP.

for now? so i can still fix my psp if i'll wait for the fix right? but is there any possibilities that the fix will be discovered? or this is the only way? thank you for the response.

there is way to fix ta088v3 go to the psp service buy a MoBo and they will fix it for you. sorry for my bad english

I am a noob
 

I have a bricked psp 3004 3g model data code 8d.
Don't know motherboard because bricked before checking it. Will this work?????????
If yes please give me the link for nand programmer ebay or dealextreme will do. And i also need link for chinese memory stick because i have 3 but they are original. Please help I am a 13 year old noob. Dad is gonna help me with electronics and all but I need help from your side too.:unknw::unknw::unknw::unknw::unknw::unknw:

Or else:suicide::suicide::suicide::suicide: for me

is there a possibility that this magic MS be massively produced and sold in the open? It would be cheaper than buying the programmer itself...

It's too hard :(

Could work this clip: https://www.ic2005.com/shop/product.php?productid=129
with a NAND Programmer?

The pinout of HY27UH08AG5M is the same of the clip (8bit)

Could be a possible solution solderless?

Can I use this memory card for make the MMS!! Please Help!!

http://i812.photobucket.com/albums/z...0/P1050104.jpg

bruceteh95, try it :)