Была найдена проблема, создающая помехи при обмене с микросхемой CD4011. При этом на микросхеме К561ЛА7 всё прекрасно работает. Проблемой оказались светодиоды. Все, кто столкнётся с проблемой, что нет связи между микроконтроллером и PSP, попробуй выпаять резисторы, которые подключены к светодиодам, либо сами светодиоды. Если заработает обмен с приставкой, значит проблема в этом. Решается путём увеличения номинала резисторов до 1к. Проверено лично. В проекте на гитхаб обновил схему и гербер файлы. Так же поправил smd версию платы.
A problem was found that interferes with the exchange with the CD4011 chip. At the same time, everything works fine on the K561LA7 chip. The problem turned out to be the LEDs. Anyone who encounters the problem that there is no connection between the microcontroller and the PSP, try to unsolder the resistors that are connected to the LEDs, or the LEDs themselves. If the exchange with the console works, then this is the problem. It is solved by increasing the resistor value to 1k. Personally verified. In the project on github, I updated the diagram and gerber files. I also corrected the smd version of the board.